The tracert command tracks the route a package needs to reach a destination and displays information about each hop on that route.For example, start tracert softwareok.de , then you will see server information about every node point on the network. If you have trouble connecting to a Website, tracert can show you where the problem is. Here at the Fritz box is only 2 milliseconds, so everything is OK! ( Orang marked) If too long a wait (> 50 ms) in the Fritz box, or other nodes, a restart of the router, or the Fritz box, could help. The third node is your provider (here 8 milliseconds). Too long waiting time (> 50 ms) to the provider AT&T Internet, CenturyLink, Verizon High Speed Internet, or others, (Red marked) could be a technical problem. A simple call to your local Internet service provider can solve the problem. With a request for a port check of their connection. Or a port reset. A restart of the router is usually sufficient, but then repeat the measurement sometimes in 1-2 hours, often it is that there is just maintenance work, or a general temporary overload. If you do not like the prompt, you can also use the free Windows tool: ► Use TraceRouteOK to find the way through your data through the Internet! Microsoft Windows [Version 10.0.16299.371] (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Users\Nenad\Desktop>tracert softwareok.com Tracing route to softwareok.com [85.214.51.15] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.0.2.2 2 <1 ms <1 ms <1 ms fritz.box [192.168.178.1] 3 10 ms 7 ms 7 ms 62.155.242.18 4 21 ms 23 ms 23 ms 217.239.42.142 5 21 ms 21 ms 21 ms xe-2-1-0.core-b2.as6724.net [87.128.237.182] 6 50 ms 22 ms 37 ms vl443.dcata-b9.as6724.net [85.214.0.119] 7 21 ms 22 ms 21 ms h2444034.stratoserver.net [85.214.51.15] Trace complete. C:\Users\Nenad\Desktop> The tracert Parameter!Microsoft Windows [Version 10.0.16299.371] (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Users\Nenad\Desktop>tracert /? Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name Options: -d Do not resolve addresses to hostnames. -h maximum_hops Maximum number of hops to search for target. -j host-list Loose source route along host-list (IPv4-only). -w timeout Wait timeout milliseconds for each reply. -R Trace round-trip path (IPv6-only). -S srcaddr Source address to use (IPv6-only). -4 Force using IPv4. -6 Force using IPv6. C:\Users\Nenad\Desktop> FAQ 22: Updated on: 26 August 2023 09:28 |